Skip to content

What Changes in a Sim Bay for a Left-Handed Golfer

Last checked November 20, 2026

A left-handed bay is not a simple mirror of a right-handed one. Some parts flip, some stay where they are, and a few depend on what kind of launch device you own.

The launch device decides the most

A launch device is the unit that measures the club and ball. Its type sets how much work a lefty needs to do.

One maker says units that sit next to the ball "need to be repositioned and recalibrated when switching between right and left-handed play"1. That's a real job, not a menu tick.

Radar units that sit "directly behind the hitting area" are described by the same source as switching hands without adjustments. They only need to line up with the ball spot1. Ceiling-mounted camera units are described the same way1.

Another maker splits it by type. For its overhead units, switching hands means assigning a handedness to the player profile. For its ground-based units, you also move the device "to the opposite side of the hitting area"2. Follow your own device's manual, since models differ.

The software has its own setting

The device and the software both need to know you swing left-handed. One maker says switching hands is as simple as assigning a handedness to the player profile2. Your own manual shows where that setting lives for your model, and it is worth checking before the first swing. The handedness settings page covers where to look.

The room changes shape

A mirrored swing sweeps the club through the other side of the room. So the clear space to the left and right of the tee matters. One source puts it plainly: "the swing area to the left and right of the tee is important"1.

Trackman says a single right-handed golfer has very different needs than a commercial bay designed for right- and left-handed players rotating through all day3. If you play left-handed in a room built around a right-handed plan, measure again. The mirroring page shows how to flip a plan.

Protection moves too

Side netting and rebound cover go where your own misses travel, as the enclosure maker directs. See side protection.

What doesn't change

The ball spot, the screen and the net behind it are only a starting point on the center line. Check that against the makers' instructions. Ceiling height is a separate check. Width and side clearance to the left and right of the tee can change with handedness. Check the maker's figures for your own enclosure and device. Check your own swing with a real club before you build, and keep people out of the hitting area. The swing space page shows how.

Which parts of a bay depend on handednessLaunch device typeSoftware handedness settingSpace left and right of the ballSide protection
Check the device type first, then the software, then the space around the swing.

Reference list

  1. Golf Sim Set up Tip for Right and Left-handed Golfers, BenQ
  2. Does the launch monitor work for both right-handed and left-handed users?, Uneekor
  3. How much room do you need for a golf simulator?, Trackman