Skip to content

Side Netting and Rebound Protection on a Left-Hander's Side

Last checked November 20, 2026

A real ball rebounds. If a mishit reaches a bare wall, a window or a door, it can come back toward the hitting area. So the plan is to cover what a ball can reach, as the maker of your enclosure says.

Why a left-hander's plan differs

A right-handed bay diagram often shows side netting on the side where a right-hander's wild shots are likely to go. For a lefty, that can be the other side. Don't copy the netting position from a right-handed layout. Look at your own room.

Space to both sides of the tee matters for the swing1. Space beside the screen matters for the ball. Walk the room and note every hard surface within reach of a ball from the left-handed hitting spot.

Stand at the hitting spot and look toward each edge of the screen, then toward the side walls and the ceiling. Anything a ball could reach is a surface to deal with. Write the list down, because it becomes your shopping and measuring list for the maker's side cover.

What makers and sources say

The sources are plain about it:

  • Impact screens "should be properly rated"2.
  • "Side netting and ceiling protection can prevent damage"2.
  • One source calls "rated impact netting, proper club testing, and sufficient clearance" the safeguards for a ceiling2.
  • Enclosures, screens and nets often carry their own minimum height requirements, according to one seller's planning page3.

That last source says: "We recommend checking these specifications"3. Do. Compare the figures with your own room before you buy.

Covering hard surfaces

Cover walls, windows, doors, mirrors and anything glass near the screen, in the way your enclosure maker describes. Never hit into a bare wall or window. If the maker doesn't say how to cover a surface, ask the maker's support instead of improvising.

Fixing netting, frames or anything to ceilings or walls follows the maker's instructions. For anything structural, use a qualified tradesperson.

Check the layout

  1. List hard surfaces near the screen and the hitting spot.
  2. Read the enclosure and net manuals for side cover and spacing.
  3. Mark where the left-handed player stands and swings.
  4. Hit slow practice swings and check the club doesn't touch the net or frame.
  5. Keep everyone else out of the hitting area during a swing.
Planning side coverFind hard surfaces near the screenRead the enclosure maker's guideFit rated netting or paddingKeep people out of the hitting area
Cover what a ball can reach, as the maker directs.

The club check is laid out in checking swing space. A bay that's shared with right-handers needs this walk-through for each player, since each hand sends the club and the ball to different places.

Keep a note of the maker's name for each piece of cover, its fitting instructions and any limits it states. If you change the enclosure later, you'll know what the original cover was rated for.

Reference list

  1. Golf Sim Set up Tip for Right and Left-handed Golfers, BenQ
  2. How much room do you need for a golf simulator?, Trackman
  3. Plan Your Space, SkyTrak