Checking Swing Space Left-Handed Before You Build
Check the space with the longest club you actually play, swung left-handed, in the real room. Do it before you buy or fix anything in place.
Why not a rule of thumb
Articles give round numbers. One planning guide gives 10 feet (3.0 m) as the practical minimum ceiling height for its radar system, saying "Ten feet is the practical floor"1. Another source notes that makers often set minimum heights for their own enclosures, screens and nets, and recommends checking them against your ceiling2.
So two numbers can both be true, and they can still disagree for your equipment. The maker's own figure for your own enclosure and device still takes priority. If a rule of thumb says you have enough and the maker says you don't, follow the maker. Never plan to hit in less space than the maker allows.
Some devices add their own demand. A guide notes that for ceiling-mounted systems, "radar geometry depends on clear space, not just swing clearance"1. Clear space for the device is a separate check from clear space for the club.
The club check, step by step
- Write down the room's height, width and depth, and note lights, beams, doors and anything that sticks out. The same guide advises writing everything down1.
- Remove anything that can be removed. Move or cover a light fixture if the maker's instructions allow.
- Mark the ball spot and the stance for a left-handed swing. Use the plan from the mirroring page.
- Take your longest club and make full swings before you commit to equipment1.
- Start slowly, then swing at speed1.
- Watch the club head through the whole arc, not just at the top and at impact. Check the follow-through, which is on the other side of the body for a lefty compared with the usual diagrams.
- Have the room clear of other people while you swing.
- Compare what you found with the maker's published figures.
Width on both sides
Space on both sides of the tee counts3. A lefty's follow-through reaches toward the other wall. If you only check the side you expect, a door frame or shelf can catch you out.
If the club touches something
Stop and change the plan. Don't shorten your swing to fit a room the maker didn't design for. Options include moving the hitting spot within the maker's allowed area, removing the obstacle, or choosing a different room. Anything that needs structural work, such as moving a beam or mounting to a ceiling, needs a qualified tradesperson and the maker's instructions.
Once the club clears, move on to netting on the hitting side. Keep your measurements and the maker's figures together in one note. You'll want both when you order anything, and again if the room changes.